Summary

The original screw fixing the upper section of the On Stage Stand is not disassembled, so it was decided to create an attachment to the bolt with a cap, which is glued in at the end. It was also an interesting solution to come up with a safety bolt attachment that would always stay on the post.

Post-Printing

Instructions

            <div><p>After printing, I recommend melting the head of the M8 bolt into the body of the model, and only then gluing the cover on.<br>.<br>.<br>I printed this model on a small printer, with a print area of 100x100x100mm, so there are some print roughnesses, but the model turned out solid.</p></div>

Custom Section

Parts required for assembly

            <div><ol><li>bolt M8, 80 mm long - 2 pcs. </li><li>M8 nut - 1 pc</li><li>washers M10 (low profile) - 2 pcs (for safety stopper)</li><li>Keychain rings, 30 mm in diameter - 2 pcs. They can be replaced by a braid or a sling for attaching to the main body of the rack.</li></ol></div>

Clamp knob M8 for sound stand