Saitek X-55 / X-56 Rhino HOTAS Desk Mount (STICK AND THROTTLE) - Reworked

This is a modified Version of the X55/X56 Desk Clamps by netcrawl and iGavello.

• centered the hole for the cable
• added walls to the T-shaped part, to hold the base in place in addition to the printed screws
• added 15mm spacers to keep the base more secure during movements
• strengthened connection between front and back parts
• added a version without needed supports (needs extra M3 screws and threads instead)
• changed rounded edges to chamfered ones, to improve printability
• changed desk thickness to 26mm, to allow 25mm tables to fit more easily
• Increased thickness of side walls for studiness
• moved side walls slightly, to fit the throttle more easily

Supports are only needed for the Version without extra screws. If you print the split up version, you won't need supports, but M3 screws and M3 screw threads instead.

If the joystick-screws are too fragile, you can also use M6 screws for this, just be careful when screwing them in, to not deform the threads (unless you also use melt-in threads)