HO Signal Tower - Short Version

I created a short, 2-story version of the 3-story tower by KABrumble. This was intended to be used at an interchange while the 3-story version sits at the entrance to the main yard. Only the parts modified are posted here, the floors and door/window trim from the original design must be used to complete this version. The thin support strips in the large window openings must be removed after printing. Updated to include a lamp bracket for a 603 LED and the coal bin/lid/lid support board.
The lamp bracket is grooved to hold the wires from the LED. The LED is glued facing down, the wires routed through the hole, along the top and side channel and through the hole to exit the bottom.
The coal bin should be filled with loose scale coal (or gravel painted gloss black with a brown wash).