RAM ball mount plate.

I needed a mount plate to mount some macro keys on (used VHB tape). Found the og designers bit and used it for a base to quick and dirty make a thing. Depending on your tolerances you may need to upscale (both pieces) ~ 5%. Stock size was a little too tight for 1" ram ball ends i had. Had a .2mm nozzle on printer so i printed in .12 layers with 3 wall (typical setting i use up to .4mm for overhangs and what not) inner wall first. 60-75% infill with triangle infill on the base bit. there is 3 degree tilt on the male thread end so i used a 50degree overhang tree support for paranoid sake. ring i used 30% infill. use a thin coat of liquid electrical tape on faces of the socket for a lil more bite. Works in pla, but other materials would be more stout