Reviung41# case files

Two base options, flat and 6˚ tilt. The full print files require a 235x235mm print bed.
Split files are to make the full case for those with a smaller print bed.

The switch plate should be printed with a layer hight that is some divisor of 1.5mm for best switch locking results.

BOM:

• 6x 6mm diameter 2mm high magnets for locking the skirt to the base
• 1x M2 >= 6mm screw
• 1x M2 heat insert screw

The foot stencil is to shape a silicon stick on pad.