Record Cleaning Machine for Ultrasonic Cleaner

A device to rotate records in an Ultrasonic cleaning machine so they can be cleaned. The mounts are designed to work with a cheap reduction drive electric motor (I got mine from ebay) and incorporates holes for power (plug or wire) and a switch. Includes the main motor mount, cover for electrics and switch and opposing mount.

Required to complete the build:

1. Electric Motor (I used a 12v 0.6RPM motor and I run it on 5v to run it slow for 3 revolutions in 7 mins). Motor has a 6mm shaft but this is not critical as you can adjust the mount to suit. The hole pattern is 18mm width and 33mm height
2. A way to mount the rotating shaft to the motor (I use a machined bayonet mount)
3. Power plug
4. Switch
5. Shaft and associated hardware (I will provide some record clamps but these are not tested. Just copies of my PVC and Aluminium versions). I used 1/4" aluminium rod on my machine.

I printed in PETG on my standard settings (5 walls, 38% infill), feel free to experiment. I can't imagine the tolerances are too critical.