Solidoodle Case Riser Kit

The standard Solidoodle case doesn't provide enough clearance above the extruder, which can lead to filament stripping. It's also irritating to have to use a screwdriver to remove the case, so you may end up running the printer with the case just resting on top of its fixing screws. This isn't very secure, and can be very noisy.

This Thing provides a set of parts to raise the case by 25mm (enough to avoid any problems of filament fouling) and uses thumbscrews to both hold the case securely and allow quick removal.
N.B. - to make the case fit properly using this kit you will have to make some new holes in the back of your Solidoodle case. Be sure you're happy to do the metalwork before starting to make these parts.

The thumbscrews are derived from Jon Bondy's highly recommended Solidoodle bed-levelling thumbscrews http://www.thingiverse.com/thing:38064

The front pillars are fitted with slots to hold a small polycarbonate window.

I've provided STL files with both grouped and individual objects so you have a choice of how to print the parts.