AMD Radeon Pro WX 4100 Low-Profile Bracket

This is a low-profile (LP) bracket for the AMD Radeon PRO WX 4100!

Bought an AMD Radeon PRO WX 4100 that only came with a full-height bracket and wanted to use it in a SFF PC Build.

TESTED! Fits well and supports GPU well. Used in my Dell Optiplex SFF 5070.

There are 2 STLs:
-1st is for the standard dimensions of a PCI-E bracket. Would only recommend printing and using, if for some reason the case doesn't play nicely with the 'thick' version of the bracket.
-2nd is a modified version of the dimensions that I tweaked myself to give the bracket more structural integrity and support. Some areas are thicker and won't be as flexible as the 'thin' standard bracket. Would recommend this bracket over the standard 'thin' bracket, personally.

Things you may need:
If you choose the 'thick' bracket, you may need to use a M3x6mm bolt and an M3 nut for the bottom foot of the bracket to attach it. For the top foot, you can re-use one of the screws from the original bracket. You could potentially use the 2nd original screw to tap threads into the plastic as well. The choice is yours. I went with the M3 nut and bolt, as I think it would be stronger.

Remixed W2100 Bracket by: imadov (thing:3241193). Used as baseline measurement for the bracket itself and made adjustments/tweaks accordingly to the WX 4100's dimensions.

Highly recommend printing in PETG or PETG-CF. PLA may distort, warp or melt with the heat coming from the GPU while under load. Best results I found was printing in PETG-CF over printing in standard PETG.

--------------------------------------------------------CHANGELOG--------------------------------------------------------
-AMD-WX 4100-LP Bracket-Thicker-v5.stl - 09/12/24
-Added some thickness to bracket in areas to allow more structural integrity. Middle section and mounting feet are now 1.5mm thicker than the stock bracket.