Pittsburgh SAE and Metric Go-Thru Socket tray

I wanted to make a compact tray for only the sockets. Tray is 120mm x 170mm

1 user said that he needed to print 5% over sized due to not enough tolerance built into the model. Take that in to account when printing. Thank you

Edit: 24.04.2026
I increased the base thickness by 5 mm, as the original base felt a bit too thin. The original model is still included. Version 2 is the updated model with the thicker base.

Edit 26.04.2026: I printed the model and would recommend printing it a few percent oversized. It works as is, but the detent on the sockets is a bit snug. Printing slightly larger improves the fit, and the same applies to the extension bar and adapter. I would recommend printing at about 2–5% oversize.