Plumbing, Etc. for Compact Flux Capacitor by Bladan

For those building the Compact Flux Capacitor by Bladan: I made two pipes for the top and side, the acrylic tube holder that goes onto each capacitor, the red grommet for the wires and covers for the junction box to cover the side screw holes. I am also including printable labels for the caps and the box

For my build I used these items

1) Since I glued the screw covers on and filled/painted them, I had to cut the junction box screws then use these latches: https://a.co/d/bqaN3Af (2 on each side)
2) I used these lights: https://a.co/d/ftGWPgb
3) I cut the battery box off the lights and used this plug, so you can plug the battery box in: https://a.co/d/fVKigeV
4) I used the same copper wire and made little wire clamps around the clear tube
5) I used this wire: https://www.mcmaster.com/catalog/130/983/6659T18 (yellow, fits perfectly and has no writing on it)
6) Used this acrylic sheet: https://a.co/d/g7ZztId
7) Also attaching a PDF to print the labels for each capacitor. I printed them on adhesive printer paper and glued them on to each capacitor
8) I used this https://a.co/d/2JKcssU Gold Rub n Buff for the capacitor color (gives off a more metal look)
9) On each capacitor I drilled two tiny holes into the top and added wire for a more realistic look
10) For the line to the right, I used 6AN Stainless Braided Hose attached to this: https://a.co/d/3zoBTh0 with two designed fittings (the top takes this magnet: https://a.co/d/cPBItoJ)

My completed Flux Capacitor: https://www.tiktok.com/@ozzyanddad/photo/7454308371173362986