( Light Base - Custom Feet ) Dreieck Standfuss H=50mm / triangle base H=50mm LightBaseCustomFeetContest

DEUTSCH
Ich habe mich entschlossen beim "Light Base Custom Feet Contest" mit zumachen und einige Füße zu konstruieren.
Die Idee diese Fußes stammt aus meiner beruflichen Konstruktion, der Übergang zweier unterschiedlichen Formen.
In diesem Fall wäre es der Übergang vom Dreieck zum Rechteck. In der Kunst kommt sowas immer gut an , mal sehen wie es beim Light Base" ist.
Das Modell im Slicer öffnen und unbedingt die Skalierung von 100% auf 1000% stellen. Die Gesamthöhe muss 50mm sein.
Für ein optimales Ergebnis sollte das Material PETG sein, Wandlinien 4 und ein Infill von 20% haben.

Die "BasePlate" einfach in das ausgedruckte Modell legen , wahlweise mit 2 Schrauben fixieren oder mit Kleber / Sekunden-Kleber

Hinweis :
Im Slicer die Skalierung von 100% auf 1000% unbedingt stellen.

ENGLISH
I decided to take part in the "Light Base Custom Feet Contest" and construct some feet.
The idea for this foot comes from my professional construction, the transition between two different shapes.
In this case it would be the transition from a triangle to a rectangle. This kind of thing always goes down well in art, let's see how it is with the "Light Base".
Open the model in the slicer and make sure you set the scaling from 100% to 1000%. The total height must be 50mm.
For an optimal result, the material should be PETG, have 4 wall lines and an infill of 20%.

Simply place the "BasePlate" in the printed model, either fix it with 2 screws or with glue / superglue.

Note:
Make sure you set the scaling from 100% to 1000% in the slicer.