3/8 LP Chainsaw chain depth raker gauge tool

Quick sketch-up I did moreso as a proof of concept since its suppose to be made of metal. Works to check, file, then check again.
Gauge thickness=1.2mm (at minimum the print needs to come out to +-1.00mm, but will give a slightly more aggressive angle)
This can be used to set the raker/cut depth after sharpening the cutter teeth. Should work for the majority of 3/8 LP .050 (not full) chains [if you measure from the raker to the center of the first rivet following it, should be around 8-9mm max to be sure].
Maintains around a 6 degree avg cutting angle through the lifespan of the chain. This is generally the angle used for hardwood cutting.

Notes:
In the picture it is upside down. It is easier to be used the other way.
Rest the tool on the rivet not the strap.

Credits.
This was possible due to the efforts of the gauge tool calculator creator: hannes69