Weighted Loupedeck Live Stand

Stand for the Loupedeck Live stream deck with optional riser base.
Check out the photos and exploded view for an idea how the parts are assembled. PM me if you need help.

You'll need a couple of additional things:

• 4 M3 threaded inserts (+ soldering iron for inserting)
• 4 M3 screws
• round 8mm diameter magnets to go to 8/12 cavities - see below (I used 1mm thickness so 2 for each cavity)
• 2 zipties (3.5mm)
• glue
• (something to fill the 2 hollow parts - e.g. modelling clay)

The feet and adjacent parts (loupedeck-case-back-bottom, base-top a loupedeck-feet) have cavities for round magnets (2mm height, 8mm diameter; I used 1mm thick magnets so 2 for each cavity).
I put some stick-on rubber feet to the feet cylinders.
They are ment to be used when not attached to the optional riser base.

The bracket back and bracket are glued together.
The bracket has M3 threaded inserts for attaching the bracket locks. I put some adhesive padding on the back of the bracket where the Loupedeck touches it.
The case-back-top attaches to the bracket via zipties.

I used modelling clay to fill the hollow parts and glued on the lids.