Pinball Display Glare Guard

Display Glare Guard blocks dot matrix display reflection from playfield glass.

The black plastic 110mm x 490mm shield mounts in minutes below the display and blocks glare from the playfield glass without obstructing the player's view.

Installation is easy:

1. Align the 2 identical parts side by side and glue the joint in the center.
2. Remove lockdown bar and slide playfield glass down about an inch.
3. Insert the short bent end of the DISPLAY GLARE GUARD into the playfield glass rear trim so that the Guard is angled upward.
4. Slide the playfield glass back in place to secure the Guard in place and replace the lockbar.
5. On many machines, installation can be done without sliding the playfield glass down. Just wedge the guard into the playfield glass rear trim molding.