Foot support for SIHOO ergonomic chair

This is a support for the SIHOO M59AS ergonomic chair. To play the guitar and have your leg a bit higher. Or also to rest.

Materials.

I have printed it with PETG 50% filler, with the structure in line with a distance of 1.5mm between them.

It also requires the use of two screws with a maximum length of 24mm by a diameter of 5mm with their respective nuts.

To fix it to the chair you only need two 5mm wide plastic ties. Also if you want to have a little more security, you can also use double sided tape on the inside.