Wall mount system for @Thorgal's Cyclone Dust Collector

I wanted to wall mount user Thorgal's Cyclone Two Stage Dust Collector.

Here is the original dust collector by Thorgal. https://www.thingiverse.com/thing:6418044

The wall mounts bolt in-between the inlet or coupler and the top of the top cyclone. Nothing special for printing instructions other than make it a stronger print (thinker walls/infill).

My plan is to have a 30 gal trash bin below with a 3" flexible tube to collect the dust, rather than a rigid 5 gallon bucket. This way I can have the dust separator plumbed into permanent collection tubes for my shop and easily remove the bin when it is full.

The elbow and 2" vacuum coupler are intended to to be used inline with the original coupler that connects both stages together. By printing a second coupler, you can add the elbow and vacuum coupler to rotate the vacuum connection 180 degrees so the line can come in vertically from the bottom.

I will likely continue to modify this to make it more material efficient.