Barbie Locker with Door and Drawer

This is a Barbie-scale locker I made for holding her backpack and accessories. It is 220mm tall, 110mm wide, 88mm deep. Some assembly required (namely gluing the hinges onto the door and frame).

=== PRINTING ===

The 3MF file should provide a good starting point for orientation and supports. When printing with PLA, the corners will tend to curl/warp (especially the door), so you may have to adjust your cooling, temps, and brims to counteract that.

I used mouse ear brims at the corners, no cooling for the first 5 layers, and reduced max part cooling to 65% for the rest, but ultimately you'll have to experiment for yourself.

=== ASSEMBLY ===

The bottom drawer should just slide right in.

I recommend assembling the hinges together first (put together and insert the hinge pin) to ensure alignment with the door and locker. LockerFrameSideHinge should be glued to the locker, LockerDoorSideHinge (the thinner one) should be glued to the door. See the pictures as an aid.