Vive DAS Headphones to Varjo Aero Clip (Lowered)

based on DarkClown360's model (https://www.thingiverse.com/thing:5216705)

I found the original model to not be accounting for people who either have low ears or wear with the Varjo Aero strap adjustment set to highest (me)
. The headphones would sit too high up, so I moved the attachment down some 2.5cm

Print vertically as shown in picture with 2 or 3 walls (3 walls is rather stiff and so will be moderately difficult to attach)
. optionally, print with no top or bottom layers to expose the infill (i used 25% infill)

unscrew the stock cable retention clip on the left side and slot the cable(s) into the cable channels on the clip
. Cable channels seem a little too small for the headset's cable, so use at your own risk or modify to your needs

screw on the headphones
. you might have to pull the metal standoff on the headphone out more so the screw can reach

place the clips so that the headphones best fit your ears