Clip-On Lens Hood for Minolta 50mm 1:1.4 & 1:1.7 Lens with Filter

This clip-on lens hood is designed for the Minolta 50mm lenses and may also be compatible with other Minolta lenses of similar dimensions with the resessed ring at the front. It securely slides on from above, even with an optional filter attached ensuring a snug fit without requiring extra mounting hardware.

Monilta-50mm-clip_on_lenshood-v1.stl.stl
-> Cutout smaller with thighter fit but no room for mounting a filter.

Monilta-50mm-clip_on_lenshood-with_filter-v1.stl
-> Bigger Cutout with looser fit and room for mounting a filter.

For variable ND or Pol filters, the design includes a bottom cutout, allowing easy adjustment without removing the hood.
This hood enhances contrast by reducing lens flare while maintaining accessibility for filter adjustments. If you try it on other Minolta lenses, feel free to share your experience!

Recommended Print Settings:
Layer Height: 0.2mm
Fuzzy Skin (Cura) Settings:
Point Density: 10
Thickness: 0.2mm
Scaling for Fit: If printing without fuzzy skin, slightly scale down in small increments to achieve a secure clip-on fit with minimal force.