Omnifixo toolbox

I created a toolbox for omnifixo, because I like my tools in one place during a transport. Is cool to have everithing in one place on the field, if you need to repair a drone.
It is printed with PLA in default settings with supports in 0.2mm height.
How to setup this toolbox:

• Solder holder:
  • omnifixo - toolbox - solder.stl file: this is a main body for the solder tools and omnifixo holders and magnets - you need also 4 magnets 5x2mm
  • omnifixo - toolbox - solder - bottom_plate.stl file: this is a bottom plate for solder holder - needs to be glued to the main body
  • omnifixo - toolbox - solder - side_cover.stl file: this is a side cover for solder holder
• Screw drivers:
  • omnifixo - toolbox - screwdrivers.stl file: this is a main body for the screwdrivers - you need also 8 magnets 5x2mm
  • omnifixo - toolbox - screwdrivers - bits.stl file: this is a bit holder for the screwdrivers - for holding this part you can use a filament
• Tweezers and pliers:
  • omnifixo - toolbox - tweezers.stl file: this is a main body for the tweezers holder - you need also 8 magnets 5x2mm
• Srew case:
  • omnifixo - toolbox - screw case.stl file: this is a main body for the screw case - you need also 8 magnets 5x2mm and magnetic foil 200x100x1mm
  • omnifixo - toolbox - screw divider.stl file: this is a screw divider

What tools and material I use in case:

• 24x neodymium magnets
• 1x magnetic foil 200x100x1mm
• 1x Sequre SI012 Pro 65W Kit (B2)
• 1x Sequre TS-I spare tip
• 1x Sequre stand for soldering pen
• 1x Tip cleaner
• 1x FlyfishRC Screwdriver 7in1
• 1x set of Hex wrench
• 1x Tweezers NB-ESD14
• 1x some old tweezers with bended tip
• 1x filament pliers BEST-109