Modular Neutrona Wand (Ghostbusters)

I've reached a spot where I feel comfortable
with releasing the Modular Wand, this is
considered the first full release and includes
2 sideplates, 4 Nozzles, and Mounts for Electronics.

Please note that older versions are still available for
download on my profile, but are now unsupported.

The wand specifically includes (with recommended Filament colors):

Base Nozzle for Custom Nozzles (Black)
GB 1/2 Nozzle without Banjo (Clear)
Convention Nozzle with Banjo (Orange)
Snub Noze Base and Topper (Black) (Additional Note, it is recommended you Resin Print the Topper due to small parts of the piece.)
Snub Nose Spine (Brass/Gold)

Base Sideplate for Custom Sideplates (Black)
Frozen Empire Sideplate (Black and Yellow for AMS users, Black with Yellow Paint otherwise.)

The Gunbox allows the mounting of Arduino UNO microcontrollers or
any other microcontroller that fits the form factor of the UNO.

2 Mounts (SFX and AMP) are included for mounting Adafruit's SFX board and
their accompanying Amp.

This wand requires additional materials, though some may be optional:

Required:

A Clippard Valve, there's many prints out there.

5x2.8mm Magnets
https://www.amazon.com/dp/B0936M3WPK?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

SPST Momentary Switchs
https://www.amazon.com/dp/B087CYL6MS/?coliid=IYPR7BSMCSHPF&colid=1DNOLTHKOZ5NL&ref_=list_c_wl_lv_ov_lig_dp_it&th=1

Momentary Push Buttons
https://www.amazon.com/dp/B0752RMB7Q?ref=ppx_yo2ov_dt_b_fed_asin_title

Green Tubing (gas block to instrument bar connection)
https://www.amazon.com/dp/B08L34KMY1?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_9&th=1

Red Tubing (connect ignition ear to nozzle, also used on Snub-Nosed Nozzle)
https://www.amazon.com/dp/B07R78574P?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_5&th=1

Electrical Wire, 22 Gauge Stranded Should do, but solid core plays nicer with Arduino

3mm bolts and self tapping screws, with accompanying nuts.

4 mm nuts and bolts for affixing instrument bar to wand.

Super glue.

Optional (if you have no AMS):

Yellow Paint

NOTES:

The download comes with an Autodesk Fusion File containing everything,
including the as of now unreleased GB:TVG Slime Blower MKII, as it is unfinished.

You are allowed to modify, add and subtract to this in any way you wish,
all I ask is you show me when you're done, I'd like to see!

The Slime Blower MKII will release with a Plasm Distribution System which
is complete, but is not included.

Filament Colors Needed for Each Piece:

Aft Banjo (Black)
Amp Mount (Any)
SFX Mount (Any)
Ear (Black)
Front Barrel (Black)
Front Cylinder (Black)
Gas Block (Black)
Grip Front (Black)
Grip Rear (Black)
Gun Track (Black)
Gunbox Bottom (Black)
Gunbox Knob (Silver)
Gunbox Topper (Black)
Ignition Brass (Brass/Gold)
Ignition Ear (Black)
Instrument Bar (BLack)
Instrument Bar Lid (Black)
Side Crank 1 (Black)
Side Crank 2 (Black)
Stream Dial (Silver)
Triggerbox (Black)
Triggerbox Lid (Black)

TODO:

Create other Nozzles from Spirits Unleashed
Create Gunboxes from Various GB Spinoffs
Create Grips from Various GB Spinoffs
Finish Simeblower MII
Q-Pack Compatibility