Best Stickered 3x3 Speed Cube on Thingiverse

Stickered 3x3 Speed Cube

Materials needed:

This 3x3 is standard size (56mm) and works with most speed cube stickers

You will need screws to fit. I'm not sure what size. Probably M2 or M3. That really depends on your printer's tolerances

You will need springs to fit your cube. You can usually find good cube hardware on thecubicle.com

Files to print:

6x Centers
6x Center Caps
12x Edges
12x Corners
1x Core

Instructions:

Import to a slicer and arrange as efficiently as possible. You may need to print by part so you don't need to cram your bed with the whole setup.
Slice and print.
Remove supports, sand if needed, fit screws and springs, and assemble parts. (You can look up how to assemble a speed cube on YouTube.)
Apply stickers carefully.
Drop in some good silicone cube lubricant. (Don't use vegetable oil, WD-40, or anything else you can get at a hardware store!) You can buy lubricant that is actually good on thecubicle.com. Break in and enjoy!

Edit: Added STEP and 3mf files.