wireless grip edited for BOBOVR G3 Plus Controller Extended Grips Support, plus enlarged stock with support

this is my crude edits of the OG files, my friend and i have the BOBOVR G3 Plus Controller Extended Grips with the BOBOVR D3 Charging Dock so we didn't want to have to remove anything on our setups to use this stock and since i recently just got the 3d printer (ender 3 v3 ke) that's also my first printer, i figured i'd give it a shot to customize it.
but what i did was make the holder insert longer to fit the G3 grip PLUS added a small hole inside at the bottom so the hand guard/strap hole fits right inside, so you only need to remove the the grip strap at the bottom(as shown in picture), you can actually leave it on and have it snug-ish fit, but i didn't want to destroy the strap just incase. so instead, as shown in the pictures i used paper trowels and camo tape on it in certain spots to make it REALLY snug during play, playing aim xr as a test game, no matter how i edited it, it always felt like it'd fall out at some point. also added a cylinder support where i edited the grips size as this was a weak spot with how rough i am plus the edits i did make it weaker in that spot. i'm pretty sure i printed it off normal settings, but you can use more walls and infill to make it stronger.
as for the stock edit, i took apart the OG files and then just stretched a small portion of it to the points i felt weak spots, i'm a big rough guy, so... it didn't take much for me to break the OG version sadly... the part that broke during play was the part that slides into the hole to fit together with the grip. afterwards i took it apart and then holding it in a few suspected weak spots, i squeezed with my hands and broke it in a couple places, so due to how it broke, that's why i edited the stock and added support where i did, but i also tried to keep a decent angle on the support for games that have bullpup guns for reloading. i also made the stock as long as i could for my printer limits because it felt REALLY short for me, you WILL have to put it diagonal JUST right for it to actually fit on the ender 3 v3 ke, anything with a smaller bed may not work with this stock. as shows in the pictures, i made the stock have a cushion for 2 reasons, extending and grip to the shoulder, it's literally paper towels folded to the thickness i wanted then taped on.
i have plans to MAYBE edit another stock.
to make the stock, i think i did 4 walls and 30% infill(default was 2 walls and 15% infill) because that part that slides into the grip both sides was pretty weak for me on normal settings. but i also did it that much to make it last. so it WILL use a lot of filament. especially with tree supports, which i used.
hopefully this helps anyone using the bobovr accessories and hopefully the stock feels better to anyone who needs it.