Honey Comb Bed Holder for 60W Creality Falcon2 Pro

I ordered this honey comb bed for my Falcon2 Pro laser.
https://www.amazon.com/dp/B0C6N2D3QN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
In the 500mm x 500mm size.

I was unhappy with the options to put it in the laser, the effects it had on laser head position and use of the drawer.
Looking online I saw this design by mateuszziemniewicz. Inspired by their concept, I created my own.
https://makerworld.com/en/models/865354-creality-falcon-2-pro-honeycomb-mount#profileId-816498

The installation is a bit tight, but this will keep the bed from moving locations once installed. With this design, the laser head can reach is full range of depth, and the drawer of the unit is independent of the bed.

I printed mine out of CF PETG. You will need to print two of each (both part A and B) to install in each corner of your printer.

One note, there seems to be a lot of variability in sizes for the Creality Lasers and these different beds. Your may have fitment issues that I did not.