Kawasaki Ninja 650 master cylinder clamp spacer

If you want to swap your handlebars for clip ons on a ninja 650, and you don't live in the US like me. Chances are, your master cylinder doesn't clear the bolts for the clip ons. I made a this spacer to raise the master cylinder away from the bar by 15mm just clearing the bolts. I printed mine with 90% infil and PETG, but recommend for long term to get this cut out of aluminium, replace the clip ons with a different style later on or for the extreme, replace the master cylinder with a radial.
you will also need longer bolts. for my 2023 ninja 650 it was m6 bolts and I had to get them about a 10mm longer.