Falcon 2 Pro Laser Z Adjustment Assist

his model is designed for the Falcon 2 Pro 22/40/60 watt laser head to assist in setting the Z height. I have not tested this on the 22/40 watt laser head, if you do please leave a comment. In addition to the models you need:
(4) M3x12mm screws to attach the frame to the laser head using the existing top screw holes.
(1) ¼" 20 4"length hex head bolt

(1) ¼" nut

You may want to glue the knob to the top of the bolt and secure the nut in it's home using glue or epoxy but this isn't usually necessary.

This model is for ABS but the build will work just fine with PLA. All prototyping and testing was done with PLA and the final part printed in ABS.