Summary

2x2 square tiles with cavities for small magnets to be inserted to make modular maps for TTRPGs

Print Settings

Supports:

Doesn't Matter

                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Magnets: It is best to use small, cylindrical magnets for this print as that will allow them to be free to roll around within the cavities. I believe I used 3mm x 6mm magnets, but others could be used depending on the scale at which these are printed. </p><p>Printing: When slicing, add a pause/break/timer to stop the print a little over halfway through. At this point, the cavities for the magnets should be tall enough for the magnets to fit inside without getting in the way of the rest of the print. Once all magnets are added, the print can be resumed and the magnets will be sealed inside. </p><p>Post-Processing: I recommend lightly sanding the textured sides of the tiles to make the texture stand out a bit more like in the pictures. </p><p>Alternative Textures and Tiles: I plan on adding several other tile types (walls, 1x2, etc.) in the future as well as alternative textures like cobblestone, wood, and better brick. If you have any suggestions or would like a certain texture, leave a comment and I'll see what I can do.</p></div>

Magnetic Dungeons & Dragons Tile