Milwaukee M18 Bit Holder

This is a remake of https://www.thingiverse.com/thing:767642
I have added M3 screws and nuts to hold the Bitholder base and the Bitholder together.
I rearranged the claws on the Bitholder to match size with the Bitholder base and to fit screws from the front.

I strongly suggest to keep orientation for both files.
Else the Bitholder's claws will be very brittle, and break very fast. For the Bitholder base, the 2 pins that secure it to the drill might not fit very well if orientation is changed.

Best assembly method for me was to add the M3 nuts to the base and screw it to the drill, but I guess it will work to assemble the Bitholder base and the Bitholder first and then use the standard M3.5 screw that comes with the original Bitholder to fit it on the drill.

Extra equipment:
2 set of M3 12mm or 10mm machine screws and nuts

Printer:
Ankermake M5

FIlament:
PLA, PETG

Every setting is standard. No support needed