1:22.5 G-Scale Arch Bar Truck/Bogie Bachmann Big Hauler and LGB length

Hello! This is a G-Scale (1:22.5) set of Arch Bar Trucks/Bogies. These are designed for use with a wide range of G-Scale rolling stock. The construction is fairly simple. All you will need besides the printed components (2 sides and a center) is a set of Size #4 Hex Nut and Screws. The screws should be 1/2 Inch length screws. These should be easy to find at most hardware stores such as Lowes or Home Depot. There are 3 varieties of Bogies available. The difference between all 3 bogies is the length of the Center piece Coupling mount. There is a Truck/Bogie with a Bachmann Big Haulers Length Coupling Mount, another with an LGB length Coupling Mount, and finally a centerpiece without a Coupling Mount. If printing for exclusivey Indoor Use, PLA or PETG should work just fine. If you are planning to use these Outdoors, most communities I've been a part of have recommended using ASA plastic. If you use these, please feel free to share pictures!