Power tool battery charger hanger

Remixed Makita hanger plate to work with just about anything. Separated the "feet" and added 3 holes for screws. I use 2 on my chargers, but you can use as many as you need.
The "bolt" from the original worked on a Porter Cable PCXMVC well enough, though they are little long. I didn't find the screw part to work well even with the Makita, so I just glued them in. it doesn't take much.

To position, attach the "bolts" to the charger, then slide them into the hangers, squaring them up. Hold the whole thing to the wall and the top outer screw holes should be visible to mark the wall. Remove the hangers and screw them to the wall. I used #8 lath screws.