Fiat Panda (169) 6,5" speaker adapters

6,5" speakers fit both in the rear and the front doors with these adapters. The rear door panel has a plastic "wall" that must be cut away to fit the 6,5" sized speakers without interference. The cut operation takes a few minutes.
Please note that the tabs ARE NOT symmetrically spread, these adapters are adjusted to fit the door mount holes. The adapter cones are designed to be printed without support.
Use short screws in the rear, screws included with speakers are normally a bit too long and you may hit the door. If your speakers have another bolt pattern, pre-drill with a 2.5 mm.

Front adapter height: 37 mm
Rear adapter height: 20 mm