Fully 3D Printable Hydroponics Setup
This is a complete, fully 3D printable compact hydroponics system designed for home use, utilizing the efficient ebb and flow (flood and drain) method. The system is designed to be low-power, cost-effective, and easy to assemble with minimal non-printed components.
Key Features
- Fully 3D Printable: All structural components can be printed on standard FDM printers
- Ebb and Flow System: Proven hydroponic method that provides excellent root aeration and nutrient delivery
- Low Power Design: Operates on 5V/12V power sources, making it energy efficient
- Easy Assembly: Straightforward construction with exploded view diagram included
- Cost-Effective: Uses readily available components from standard suppliers
Required Non-Printed Components
The table below provides direct links to the specific parts tested with this design:
Parts List
| Part | Description | Quantity | Link |
|---|---|---|---|
| Structural Components | |||
| Wooden Rods | 8mm diameter, 1m length | As needed | Local hardware store |
| Wooden Rods | 10mm diameter, 1m length | As needed | Local hardware store |
| Electronic Components | |||
| Air Pump | USB Aquarium Oxygen Air Pump | 1 | AliExpress |
| LED Grow Light | Full Spectrum 2M 5V USB | 1 | AliExpress |
| Water Pump | 12V Submersible Pump | 1 | AliExpress |
| Plumbing Components | |||
| Hose Connector | M10 Thread 6mm OD Pagoda PP | As needed | AliExpress |
| Elbow Connector | 6MM Pagoda Elbow Hose Connector | As needed | AliExpress |
| Hose | ID 6mm OD 8mm flexible hose | As needed | AliExpress |
| Growing Supplies | |||
| Net Pots | 50MM Net Pot | Multiple | AliExpress |
| Growing Medium | Rock Wool Grow Medium Substrate | 1 package | AliExpress |
Assembly
Tutorial can be found here https://www.elecrow.com/sharepj/hydrocontrol-scalable-hydroponics-system-898.html
Ideal For:
- Home gardeners wanting to try hydroponics
- Indoor growing enthusiasts
- Educational projects demonstrating hydroponic principles
- Small-scale herb and vegetable production
- Anyone interested in sustainable growing methods
Print Settings Recommendation:
- Layer Height: 0.2mm
- Infill: 20-30% for structural parts
- Supports: May be required for some components
- Material: PLA or PETG recommended for food-safe applications
Start growing fresh herbs, lettuce, and vegetables year-round with this efficient, maker-friendly hydroponic system!
The LCD Screen (CrowPanel 7") was sponsored by elecrow.com