QCTP Die Grinder Cutoff Tool for Harbor Freight Mini Lathe

Handy little tool for using cutting disc, carbide burrs, wire wheels and other 1/4" die grinder attachments on your mini lathe. Fits the central pneumatic mini and regular with ~26.6 mm head. I took about 5 measurements and spent about 8 minutes designing this and it ended up fitting about 98% perfect, tiny gap on 1 corner that doesn't affect anything. You could probably get it perfect by heating up the head of the tool a tiny bit with a heat gun and squeezing it in there, then run some air through the tool to instantly cool it down. Hardware is 3mm x 52mm, I cut them down from some longer ones I already had. You will need a strip of metal to go between the tool holder and the grinder holder so the set screws don't just dig into the plastic and loosen over time.