Surface Go 2 1927 Sim card Tray

This is the tray for the sim card for a Surface Go 2 model 1927. Getting a real tray is near impossible - no one sells them.

This thing is very fragile but it fits. Just be very careful.

Print settings:
Nozzle: 0.2mm (You will not succeed printing this with a 0.4mm nozzle - I'm almost certain)
Layer height 0.08mm
Support: yes
Print it on its side, as shown in the picture.

Warning: There is a risk of damaging the pins in your SIM slot when using this so be cautious. It seems to fit even better with the SIM card installed because the card keeps the pins from snagging when/if you pull the tray back out.
I have confirmed that it fits in the Surface Go 2 but have not confirmed that it actually works.

Good luck!