Kingdom Builder - Insert / Landscape holder

To prevent the landscapes/sections from sliding around in the box, I built a minimalist holder (14g filament).
This needs to be printed twice and placed in opposite corners. This is enough to prevent the landscapes from sliding around.
The holders have a small edge/brim to prevent them from flying around when the landscapes are removed.

You can scale the height to:

• 22mm (20mm+brim): Default as this is the height that exaclty fits in the box without lifting the lid
• 18mm (16.2+brim): The height for 8 sections/landscapes (only base game)
• 26.4mm (24mm+brim): The height for 12 sections/landscapes (base game + Nomads expansion). This will lift the lid a tiny bit.

There are three files:

• KIngdomBuilder.stl: Plain small holder. Print it upside down!
• KingdomBuilder.3mf: Two of the small holders, placed upside down and without shell layers at the underside.
• KingdomBuilder_large.stl: The larger model fills the elevations completely. It needs 2x90g filament and I have NOT test-printed it.

I look forward to constructive feedback.