Bang & Olufsen BeoSound Ouverture Tape deck cover

This is a two piece print for a dust cover for the tape player part of the Bang & Olufsen BeoSound Ouverture system.
I have printed this in a generic translucent PLA and black prusament.

The logo is (NOT MINE) : Bang And Olufsen B&O Badge made by: d3vilh and located at:
https://makerworld.com/en/models/1359982-bang-and-olufsen-b-o-badge#profileId-1404438

I used prusaslicer:
1: Import logo first, then cover (make sure it's face down.
2:Align them to eachother.
3: Make the cover unvisible and apply slicing settings to the logo. Export gcode.
4: Make the logo unvisible and the cover visible and apply slicing settings. Export gcode.

Print logo first then print the cover on top with different colour.

NOTES: make sure you have appropriate Z hop (or equivalent for your slicer) so your nozzle doesn't drag onto the logo.
Especially with translucent (or clear) plastics the layer orientation might make a visual difference when printing the cover portion so beware of that.

There are two options for the cover: one with tabs and one without. I personally am not quite satisfied with the tabbed model because it's too tight straight off the printer and requires careful heating and tweaking to fit nicely. However the one without tabs seems to sit tightly so that works for me also.