Bosch jigsaw vacuum cleaner adapter

Vacum cleaner adapter for the Bosch GST 160 CE jigsaw, might fit other Bosch jigsaws as well. Fits a vacumcleaner with a 34mm or 35mm round connector/pipe.

Complete CAD document: https://cad.onshape.com/documents/3b7c634d0d73ceee34fae5db/w/758f22bca9d35a27f464b7eb/e/88b22d2769d44ab6a23b2693

Slicing directly from the STEP files usually produces the best results, but included STL files too.

Print it standing up on the widest end, without using supports but with a brim.

Material: I used a generic TPU filament with A95 hardness, just ensure you get good layer adhesion.

I used these print settings with good results:
Layer height: 0.2
Walls printing order: Inner/Outer/Inner
Wall generator: Arachne
Supports: None
Brim: 10mm inner/outer, 0mm brim/object spacing