Servo motor folder(2mm pich) for Tower-pro made SG90

This is a servo motor folder.
This is a Tower-pro SG90 made only.
SG90 is inexpensive small servo motor. About $ 3.
SG90 is a friend of 9g servo.

All of the size I am aligned with the 50mm.
This part is <2>mm thick.
In addition, there is also a <3>mm thickness specification.
Small gripper is located in the 3mm version.
http://www.thingiverse.com/thing:746116

I can be mounted at an angle of 90 degrees.
I can be mounted to the arm part.
I will connect the servo in M2 × 8mm bolts and nuts.
I will connect each part in M2 × 8mm bolts and nuts.