Destiny 2 Rat King Half Dart Nerf Blaster

We've nerfed the Rat King,
We used the slide STL from the linked remix as the starting point and built from there.

Shoots up to 185FPS depending on how much main spring you use.
Integrated BCAR provides a significant accuracy boost.
7 dart magazines for short nerf darts.

** Requires 31K-M hardware with 6 bearings from either:
https://moosemodshop.com/products/31k-hardware-kit or
https://outofdarts.com/products/misplaced-moose-31k?variant=42746931216426

Best darts to use in this are Dart Zone Nitro+ short darts or Worker Gen 3s. You can also pick up adventure force pro darts from Walmart.

** Instructions:
This variant has a couple of notable differences between the standard 31K.

FIRST THING: install the grip cover before doing anything else. If you install the mag release first it will be difficult to slide the grip on.

When installing the mag release, instead of angling in the trigger guard in, hold the mag release and spring together into the trigger guard and then push them back against the grip, then install the trigger guard holder to keep everything in place. It won't want to come out again.

There are a couple of extra pieces to cover the muzzle and cover the turnaround that should be obvious. The skull's nose is all held together with super glue.

The trigger doesn't want to go in as one unit. Place the trigger rear into place first, then the trigger front can be dovetailed into place inside the frame. From there you can angle the assembly out to get the trigger spring into place.

Otherwise instructions for building it, and generally all 31K variants from here: https://www.youtube.com/watch?v=Z1MyD3Hhp5M