Insert / Organizer for Hubris by GMT

An insert for GMT's Hubris by Morgane Gouyon-Rety. I ended up doing a lot of stacked trays and inset trays in the card wells.
Supports sleeved cards and side storage.
Print quantities indicated in the filenames.
The layout ended up with:
A faction box for each faction that holds their cards, dice, and the large square counters in stacks (garrison/alliance, rebel versions of those, VP, etc.). Two smaller trays go in the card well and hold the faction's leader/rebel blocks in one and the faction's small square and round counters in the other. There are counter spacers to lift stacks <20 to the top.
A card tray for the tarot-sized Event cards, and another combo card tray for the small Satrapy and the remaining poker-sized cards (Roman, minor leaders, war, etc.). A smaller tray goes in the poker-sized well to hold the renown counters.
Three stacked trays, one holding Roman counters and leader blocks, one holding minor units + mercs, and one holding the various Ravaged markers and miscellaneous (turn, hostage, etc.).
Finally, there are two spacers - one in the bottom with the game name (I do not have a multicolor printer so it is in two parts) and one to hold the map/rules/aids in place to prevent shift and 'counter drift'.
The only assembly is inserting the counter risers into the faction boxes and the lower spacer plate into the lower spacer box to give some color (I did mine in a gold silk PLA). It should be fine as friction-fit but you might have to glue it depending on the print outcome.
Oh, last advice - let the lower spacer box (with the word 'HUBRIS') cool completely and be very gentle getting it off the bed. The inner parts of the B and R are on very fine sprues.