WWUMER30 - Printable WinWing Ursa Minor Extension Rod DIY (center mount between legs / chair mount)

INFO:

This is extension rod for WinWing Ursa Minor Fighter R joystick. Socket for grip is offset 30 degrees anti-clockwise for better comfort. I recommend putting rubber bands on the factory-installed springs and loose dampers. You can add M8 screw to lock the grip in place but it's not necessary.

DIMENSIONS:

• whole thing height - 92 mm
• max diameter - 34.5 mm

PRINT:

• Material: PLA+
• Infill: 100%
• 0.2 mm layer

MANUAL:

1. Open the flap on the bottom of the joystick.
2. Unplug and unscrew the grip.
3. Gently pull of the grip.
4. Put joystick grip into extension rod and pull the wire.
5. Put extension rod with joystick into base and screw them together with factory-delivered screws. Plug the wire into JST socket.
6. Loose the dampers all the way.
7. Close the flap.
8. Enjoy!