Elegoo Neptune 4 C270 Cam Mount Holder Reversible Camera - M3 screw version

Description :

Remix of "Elegoo Neptune 4 Plus C270 Cam Mount Holder" by Acuriz which implements the same basic principles but works with only m3 screws and has some tweeks to make it easier to install and print. The camera can be reversed to get a point of view further from the Y-axis gantry.

You will need :

• 3x M3x20 is the simple answer
  OR if you have a M3 kit available you can choose more precissely,
• 2x M3x10 screws (less than 32mm long and minumum 8mm) for gantry anchor. Shorter screws make installation easier but have less engaged thread length
• 1x M3x25 screw (less than 30mm long and minumum 20mm) for camera hinge

Watchout! Some M3 screws mightnot have anough head area so some M3 washers for the gantry anchor might be necessary. My m3 screws have a 5.4mm head diameter and are enough to not go through the gantry holes.

Compatibility :

100% works with Neptune 4 Plus
All other Neptune 4 series printers seem to have the same Y-axis gantry hardware!
Neptune 3 series look like they have the same gantry hardware too.

BONUS c270 focus trick :

You can adjust the focus by rotating the lens if you open the clipped front part of the webcam.