Kailh Big Mechanical Key Switch Case / Stand

Wanted some simple case / stand for the Big Key. Added optional bottom piece which fits a QT Py and an LED ring. But can also only use the Top part to have a stand.
Had some worries that the 4 legs are not stable enough - but they have not flex at all. But overall the construction is quite light which means the key migth move some when pressing it - maybe some pads at the bottom?

Parts:

• Kailh / novelkeys Big Mechanical Key Switch https://novelkeys.com/products/the-big-switch-series / https://www.adafruit.com/product/5305
• Adafruit QT Py - SAMD21 Dev Board with STEMMA QT https://www.adafruit.com/product/4600
• LED Ring 5V RGB WS2812B 12 https://www.az-delivery.de/products/rgb-led-ring-ws2812-mit-12-rgb-leds-5v-fuer-arduino

If you wondered: When pressing it sends "Enter"-key to my PC. I used https://learn.adafruit.com/adafruit-neokey-trinkey/arduino-hid-and-cap-touch as reference for programming the QT Py (key input and send command to PC - removed the touch part). .ino file is in attachements.