Click On Fleshlight Mount - The Handy 2 - With Magnet removal hole, and Separate files for each part

I've made a Remix of TH2's Fleshlight adapter, including 'two' changes:

• I've split the adapter into two separate STL files (easier for most people to handle/work with)
• I've added a hole to the interface where the magnet goes, so that the magnet could be removed by pushing it out if needed (quite handy- pun intended 😁).

So that you can easily salvage the magnet or the interface part, without having to re-print the interface or completely waste the magnet, if:

• the magnet isn't the right thickness (too thick making the interface not fit, or too thin failing to make contact with TH2's own one)
• the magnet lost its power with use (can happen simply with the passage of time, heat from friction, external magnetic fields, fractures etc.)
• or the interface the magnet goes into breaks (which I feel may happen eventually, e.g. those 2 small flaps at the bottom could very well snap off)

The hole for the magnet in this isn't so big that it reduces the surface you may wish to apply glue onto too much (so you can still glue it in if you decide to do in the future).
Though the hole is big enough that you could push the magnet out through it (for example, using the same screw that the interface attaches to the main body with).

I might eventually make a version that works with 12mm bolts/screws too as I don't have any of the 10mm ones the official model seems to be designed for.
For now, the main body remains unchanged, only the seperate interface bit's model is actually different (addition of the extra hole).