Wheels for Craftsman/MTD tracked snowblower

Replacement wheels for older Craftsman (MTD) snowblowers. I used these to replace the original wheels which had warped from 30 years of weathering. The idler wheel is the original design, the toothless version is meant to roll more smoothly since it doesn't have sprocket teeth to engage the track. For the drive wheel, the old splines need to be melted or otherwise removed from the old wheel, cleaned, and then pressed in. The v2 version has slightly looser tolerances on the fit, it will fit in the other but I had to use a deadblow hammer to get it to seat all the way. The spline spacer is to fill in the gap once the splines are seated all the way.
Printed in PETG with 10 walls and 30% 3D hex infill.