1/4 quick connect Female to 1/8 male air hose adapter (TPU)

Please read printing instructions.
I'm not familiar with those adapters so naming of this adapter might be wrong, you can tell me correct name if it's wrong.

This is an adapter to connect a mini hvlp paint gun to airbrush hose. My airbrush hose had 1/8 male threads and paint gun had 1/4 quick connect. So I made simple adapter that you can plug 1/4 quick connect (no quick release function like an actual one, just friction fit) to a 1/8 airbrush hose.

There might be very minimal leak. I inspected mine for 1 hour and somewhere around 5 psi was lost

Printing Instructions

• I made the parts slightly bigger than expected so when printed with TPU, they squish and hold properly. So printing with filaments other than TPU WILL NOT WORK
• I used + 10% flowrate and used bricklayers to make it extra strong.
• I also calibrated XY hole compensation for my filament which is 0.1 but I don't think it's necessary.

Assembling Instructions

• First put the seal into the hole of adapter then plug adapter into quick connection of your paint gun (You need to force it in), then you can connect other side of adapter to your airbrush hose.