Marvel United Seasons 1-3 organizer for everything but the minis in 3 boxes!

Please consider downloading this design from the following link, as it helps me get the occasional free spool of filament 🙂
https://makerworld.com/en/models/938717-marvel-united-seasons-1-3-everything-but-minis#profileId-904020

This organizer is for the Marvel United game, and will fit everything BUT the minis from Seasons 1-3 (so cards, tokens, locations, villain dashboards, books, inserts and props*) into the 3 Kickstarter Exclusives boxes. The Season 2 box will have about an inch of lid lift.

Sigh. Yes, there's an asterisk by "props." The Infinity Gauntlet doesn't quite fit with the villains in the S2 box. The space is only 41mm wide, and the gauntlet is 50mm thick. You can trim a bit off the bottom of the gauntlet, store it elsewhere, or, y'know, you've got a 3D printer, right? Why haven't you made something nicer than that hideous vacuum-plastic gauntlet yet? It was one of the first things I did, and I haven't regretted it.

A few other notes:
This organizer includes remixes of the action token holder designed by CARRIE111 and the large card trays by tshelly. The rest is made by me. Both of these files said remixes were allowed with attribution, so hopefully this suffices. If not, please contact me and I'm happy to make it right!
The card trays are 250mm long, which just barely fit my Bambu P1S build plate. I'm not providing split files because I can't figure out how to make a split print sturdy enough to lift when full of cards. If you have ideas, let me know and I'll try them out!
All card trays and boxes fit 60 micron sleeves. I haven't tried other sleeve sizes.
Location and Villain holders only fit the "card stock" versions. I didn't buy the cardboard versions, so I didn't design for them, sorry!
The rings that fit the mini bases for Civil War or X-Men Blue vs. Gold are just stored in their bags, as in the pics. I was going to design something, but I realized the box lid fit better if I just put them on top of the locations that way. I may revisit this in the future, especially if any of you have ideas that meet both of those goals.
Almost everything should print support-free. The only exceptions are the individual deck boxes in the S1 box. You can either print them with supports or print support-free and do a bit of sanding afterward to clean up the overhangs.
Several parts have holes for 3mmx2mm magnets to help the pieces stay together. Where possible I also added posts and holes so they wouldn't be 100% necessary. That said, I personally wouldn't risk transporting these without magnets.
Rule books, inserts and villain dashboards can be stored on top of any box. I show them in the S1 box with locations and villains, but I actually store them split between S1 and S3 to minimize lid lift.
*I am very much a "minimum viable product" designer, so everything here is very basic. The 2-tier token organizer is the most elaborate thing I've ever designed to date. I am VERY open to improvement ideas, and am happy to try suggestions and report back. I don't charge for my work, so I can't cut you in, but you'll earn the gratitude of me and your fellow players 😁