Return to Dark Tower game organizer - All In!

Please consider downloading this design from the following link, as it helps me get the occasional free spool of filament 🙂
https://makerworld.com/en/models/65514-return-to-dark-tower-game-organizer-all-in#profileId-765820

IT'S HERE! This is a complete remake of my first ever game organizer. It will store all four boxes of the all-in pledge for the Return to Dark Tower board game in just the base game box with only 1-2mm lid lift.

I incorporated the feedback from my gaming group and the community here to make it more playable with less digging. It is more modular, making it easier to remove just what you need for your game and the expansion/modifications you want. I also grouped expansion stuff together as possible (like having Doom Skulls and Monument Offerings stacked together, and making the bottom Warrior, Spirit, etc. token trays stackable in multiple configurations).

I also increased the portability of the game by making sure everything either has a lid or goes to the top of the available space so the game board or box lid holds them in place. Foes now face upward so they don't have space to slide around, plus I redesigned the sliders so there's less chance of minis tilting and popping out that way.

As always, this is a work in progress and a community effort, so if you have more suggestions, please leave them in the comments!

A few notes:

*I added posts and holes to keep things secure during transport. There are also holes for 3mm x 2mm magnets. The only exception is the super thin platform at the bottom of the Tower Lower Tray, which uses 3mm x 1mm magnets. The magnets aren't necessary, they are just added security.
UPDATE: It has come to my attention that I may use magnets differently than the rest of the world 😅 The magnet holes are 3.1mm around and 2.25mm deep. These tolerances make it possible to pressure fit the magnets by tapping them in with a hobby hammer, no super glue needed. If you would prefer to glue in the magnets, you will want 2mmx2mm magnets, not 3mmx2mm.

*All cards fit sleeved. If there were sleeves for a given card in the crowdfunding campaign, they are in those sleeves. If not, they are in standard 60 micron sleeves.

*All files are oriented how they should print. Nothing should need supports except maybe the small cutouts on the back of the card boxes and the space for the Spores tokens under the upper tower.

*The file "Return to Dark Tower Organizer Project File - Multiple Trays" is a Project file with 10 trays and my settings. I made it in Bambu Studio, so if you use another slicer, try at your own risk.

*Everything in the pictures was printed at 0.24mm layer lines with 15% infill. All told it took about 1.25kg of filament.

*This organizer holds the Foe miniatures and plastic tokens. The cardboard tokens won't fit in the same box, so if you're keeping them they will have to be stored elsewhere.

*The old organizer had space for 5mm foam around the tower. I removed that space in favor of a very snug fit that should keep the tower from moving around. That said, this is an "own risk" situation, so I am not liable if your tower gets damaged blah blah legalese.

*All files were created in Bambu Studio, because I'm still not very good with Fusion 360. As such, they are very much "minimum viable product" designs.

*If you have suggestions for improvements, please share them in the comments. This update was a community effort, and I'm always looking for the next improvement. I don't charge for my organizers, so I can't pay you for your suggestions, but you'll have the gratitude of your fellow gamers 😁