Guitar Set-up Action Gauge

Back with another "I'm too tight to spend £££ on guitar setup tools".

The StewMac version of this item is over £120, which is too much for me. I found a cheaper dial on AliExpress for around £25.
30 minutes in Fusion and 11g of PLA+ later and it's done. Works great! I removed the point of the dial to give it a flat bottom which sits better on the strings, and I had to remove the spring from the back as it was pushing the strings slightly giving false readings.
I added a slight radius to the bottom of the model, to stop it rocking on the fretboard, hence the "12in" written on the print. Probably not required but I'm too lazy to remove it now.

Link to the dial (I got the "8mm Digital 0.01 version"): https://www.aliexpress.com/item/1005006195755244.html?spm=a2g0o.order_detail.order_detail_item.3.4281f19ctNkqlI

Quick note: I found it was better to print it upside down with a small support to help the hole in the middle.