The Tape Lord, ultimate floor taping apparatus!

The purpose of this device is to allow me and my staff to spend less time on our knees taping cables. There are several devices on the market that do a similar thing, however they are either very expensive, or use proprietary tape. Or both... This is a simplified floor tape applicator with a cable guide. I suggest getting the tape started before rolling and still having somebody put tension on the cable/keep it straight for best results. I have used it solo on XLR, CAT5 and SDI cables with good results so far.

I printed mine in PLA with a TPU "tire" on the floor roller. I have included a file to do a one piece roller as well. I used a 0.8 nozzle on my A1 but you could use a 0.4 or 0.6 just as well. PETG would be a great option for this as well

Print settings:
6 wall lines
15% cubic infill
0.28 layer height or higher to speed up the print as needed
Supports: yes
Brim: (I used one. not essential)

Parts:
3x 5/16"x4" bolts for the axles
1x 5/16"x2.5" bolt for handle attachment
2x 5/16" washers as spacers for front wheels
6x 22mm skateboard bearings
1x broom handle with threads